Whe I set a filter for a specific board card, say Flop and then go back to change the filter the initial filter is not changed.
For example I set the following filter: selecting <2 <3 <4
Flop1SortedHoleCard >=0 and Flop1SortedHoleCard <=0 and Flop2SortedHoleCard <=1 and Flop3SortedHoleCard <=2
then I click ok, and go back to the filter editor. In the bottom line, where the filter is shown, the flop board cards is not shown and when I select the board texture and enter a new board, let say <Q < K <A the resulting filter is:
Flop1SortedHoleCard <=10 and Flop2SortedHoleCard <=11 and Flop1SortedHoleCard >=0 and Flop1SortedHoleCard <=0 and Flop2SortedHoleCard <=1 and Flop3SortedHoleCard <=2
see video below.
Also the way cards are counted in the filter editor is extremely annoying
https://www.facebook.com/fatking.lou...66772144114879