Hi,
what difference are betwen raise and re-raise
I guess :
re-raise vs cbet
and raise vs bet?
raise = 2BET
reraise = 2BET vs cbet or donkbet?
Hi,
what difference are betwen raise and re-raise
I guess :
re-raise vs cbet
and raise vs bet?
raise = 2BET
reraise = 2BET vs cbet or donkbet?
Last edited by Kaiou; 09-25-2019 at 11:35 PM.
I do not see the 're-raise vs cbet' stat you are referring to. Can you post screenshots and details of where you see this stat? It is most likely a simple error in the naming of the stat.
A 'reraise' (3Bet) can only happen if if there is already a bet and a raise in front of them.
It may be best if you first install HM3 if you haven't yet, then compare the HM3 version of these stats tot he HM2 version of the stat. A naming error should have been resolved if that was the cause, and if not you will at least be able to read the official definition for each stat in HM3's stat picker menus.
Preflop, the call is the 1st bet. That is why you have to fold if you do not continue, and cannot check. The raise is the 2nd bet. That is why the re-raise is a 3-bet preflop.
After the flop, there is no automatic bet. So the 1st person to bet is the first bet. A raise is a 2nd bet. So the 3rd raise to come in would be the 3-bet.
So now in your situation:
PFR C-bets. Caller Raises. PFR re-raises (3bets). This is the stat Fozzy showed
Regards udbrky (Chris)
Re-raise = re-raise check raise + re-raise oop
and 3Bet pot is ?
Anyway for me is fine this stat re-raise check raise and re-raise oop
thank you for your patience
Last edited by Kaiou; 09-27-2019 at 09:10 AM.
A '3Bet Pot' is any hand that someone 3bet during the preflop action.
If you own HM2 you should really try using the HM3 Beta as it has the definitions right in the software. The definition for these stats should answer most of these questions you have asked about HM2 stats.
HM3 Pre-Release beta is now available. Click here to register your HM3 beta now - http://www.holdemmanager.com/hm3/beta.php
- After downloading, you should right-click the file, go to properties and click unblock.*
* If you do not see an 'unblock' option you can ignore this step.
- Then, right click the file and click 'Install'.
Here are some first time install instructions - https://support.holdemmanager.com/su...tion-and-Setup
If you have any problems with HM3:
Please reproduce the problem and click the 'Send Feedback' button from the left sidebar menu (or from the 'Help' menu at the top), or choose 'Yes' if prompted to submit an error report, and send your logs and config files with a detailed step by step description of the problem that we can use to try and reproduce the problem.
If you are unable to send the logs via the automated system for any reason you can collect and send the logs manually - https://support.holdemmanager.com/su...les-to-support