Some people can show $cardrange ,but some can't

[PowerToad]

As the pic
2015-12-21_155835.jpg2015-12-21_155856.jpg2015-12-21_155946.jpg

Some people can show $cardrange(like AQ-AJ,88-66 ....) in the hud pop , but some can't. Is it about the simple size ??
I don't know how to set min sample , because I had changed all the setting about min sample =0 .

plz help me ....thanks a lot

3B_range_15-25bb_shove_EPMP.xml

[NotecaddyEdge]

Hi PowerToad,

What could be happening here is that the ones which aren't showing a cardrange, are ones which you haven't seen the hands (didn't get to showdown). The sparks could be generated from your Implicit Strength/Weakness in your NoteCaddy settings.

[PowerToad]

Hi PowerToad,

What could be happening here is that the ones which aren't showing a cardrange, are ones which you haven't seen the hands (didn't get to showdown). The sparks could be generated from your Implicit Strength/Weakness in your NoteCaddy settings.

I don't think so. Because if I move mouse to the note. The heatmap show which card it have.(like pic)
2015-12-21_225356.jpg

I can see it 3B shove vs EP {1/12 8%} = KK (from heatmap)
Because notecaddy block heatmap when I am playing PS, so when I am playing I just can see 1/12 8% (and it doesn't help much)

[NotecaddyEdge]

The definition you uploaded here is working properly for me:
yfxozsm.png

What I would suggest is to reset and reprocess your notes and see if it's working like you want after that. How to reset NoteCaddy notes - Assaultware Wiki

[PowerToad]

The definition you uploaded here is working properly for me:
yfxozsm.png

What I would suggest is to reset and reprocess your notes and see if it's working like you want after that. How to reset NoteCaddy notes - Assaultware Wiki

I had reset several times.
Not only this not , as you can see , almost all notes have the same problem .
I can see hand in heatmap , but it doesn't show on $cardrange
2015-12-22_120301.jpg2015-12-22_120317.jpg2015-12-22_120333.jpg

[NotecaddyEdge]

Hi PowerToad,

What do you have set in NoteCaddy / File / Settings / HUD - Maximum enumerated values to show in a note?

If it's set to 0, try setting it to the number you'd like to use, like 5 or 10 for example.

[PowerToad]

Hi PowerToad,

What do you have set in NoteCaddy / File / Settings / HUD - Maximum enumerated values to show in a note?

If it's set to 0, try setting it to the number you'd like to use, like 5 or 10 for example.

I will try ..
Could you explain what is this number mean ? How big should I set it ?

[NotecaddyEdge]

I will try ..
Could you explain what is this number mean ? How big should I set it ?

Maximum enumerated values refers to amount of different hands it will show. If you've set it to 5, it would only show a maximum of 5 hands. If you set it to something like 20 it would show a maximum of 20 different hands.

I set mine to 5 so it doesn't take up too much space. I can always hover over the hands to get a full list of them too.