I ran through some leakbuster filters and found out that my biggest loss was with TPGK or worse by turn saw SD filter.
As the instruction video recommends - I reviewed some of the hands and I would like to have your opinion what kind of adjustment should I make.
This filter shows total loss of -536d which is quite high since 90% of my hands are 20nl and rest 50nl. My sample size is about 60k hands so it's over 20 buy-ins!
Here are the losses divided positionally:
Most of the losses come from situations where my line was bet flop, bet turn(-220d) or bet flop, check turn (-180d). I lose -70d when my preflop action is call.
I have HU background so I'm thinking I bet too much with weak TP's from button. I always cbet any pair, gutshots, flushdraws, openenders and Axx Kxx flops. IP I cbet a bit more, I add backdoor flushdraws and overcards on dryish boards. I cut down my a bit cbetting when I see high cr/flop raise percentages. My 2barrel strategy simply is 2barrel almost 100% of the time on turn when I have any kind of TP,OESD,FD.
Some of my own conclusions/notes:
BET + BET line adjustments
====> 2nd pair barrels SMALLER SIZE against villains with low fold to cbet
====> Always barrel FD / OESD?
====> Check back weak TP's IP on flop, when you cannot get 3streets value
====> Cut down OOP CBET / experiment w/ CR weak hands vs non folders / C-C strong vs guys who fold a lot
BET + CHECK line adjustments
====> IP: Fire river SCARECARDS if line goes bet, check-check, check
====> OOP: Try bet, check-check, bet lines SCARECARDS
I steal 61% from button and 52% from SB, I think this causes a lot of situations where I build a bit too big pots with weak hands.
So I'd like to ask you:
1. What kind of results you have with this filter?
2. How should I try to fix this leak?