Error
Results 1 to 6 of 6

Thread: Error

  1. #1
    Junior Member
    Join Date
    May 2009
    Posts
    29

    Default Error

    "An error occurred while loading the Prefs. files: Could not load file or assembly 'System Xml, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089' or one of its dependencies. The system cannot find the file specified.

    suggestions, ty

  2. #2
    *** HM3! *** fozzy71's Avatar
    Join Date
    Jun 2005
    Location
    HM Support
    Posts
    32,803

    Default

    Did you recently install a new HM beta update? Are you sure you installed it to the proper \holdem manager path?

    1) Clear your web cache, and download the beta update again, with another browser if possible.
    2) Right-Click > Save Link As to save it to a different folder.
    3) Reboot, and run the installer first thing.
    4) Make sure the update is installing to the proper \holdem manager folder


    If that doesn't work:

    1) Close HM and the Table Manager.
    2) Delete your existing HUD files, so HM will rebuild them to default.
    3) Delete > \Holdem Manager\Importing\Config\prefs.xml, pospref.txt and pospref2.txt.
    4) Start HM< Auto Import, Open the Table Manager, and open 1 cash table.
    5) After a couple hands it will pre-fetch some observed hands to show the HUD.
    6) Use Ctrl Right-Click Drag to move the panels Move the main/first panel for each player first. This is the panel with the Note Icon (astersik).
    7) Once the main panel is in the proper position, you can position the sub-panels for each player.
    8) Once they are set, go to Table Manager > File > Save Positions.
    9) Close that table, open a new one, and sit to play.
    10) If the HUD pops up while waiting for the big blind, do not move any hud panels.*

    *Once HM imports your first played hand it will spin the HUD to correct for the preferred seating settings.

  3. #3
    Junior Member
    Join Date
    May 2009
    Posts
    29

    Default

    It was working fine till i had to use a dramatic shutdown on my pc when it froze. ill shud i still try a restall

  4. #4
    *** HM3! *** fozzy71's Avatar
    Join Date
    Jun 2005
    Location
    HM Support
    Posts
    32,803

    Default

    Are you getting the same prefs error? The previous instructions should work to cure it.

    When you install or reinstall HM it does not actually install a prefs.xml HUD file. The file is created the first time you load HM. Reinstalling wouldn't be any different than just deleting the file and restarting HM. They will both cause HM to recreate a fresh prefs file.

    If that doesn't cure it, or you have other problems, let me know and I can assist you or give the reinstall instructions, but that is likely overkill for this problem.

  5. #5

    Default

    Fozzy,

    I was helping this guy out through Mikogo. Here's the exact error.


    We uninstalled HEM.
    We deleted all files in HEM folder after uninstall
    When that didn't work I installed HEM to c:\Holdemmanager

    Get the same error on start up.

    Any suggestions?

    Thanks,
    -B

  6. #6
    *** HM3! *** fozzy71's Avatar
    Join Date
    Jun 2005
    Location
    HM Support
    Posts
    32,803

    Default

    I assume you had updated to the latest beta version, and were still getting that error?


    Did you use the windows control panel to uninstall? Try using revo uninstaller.

    If you have Vista, please verify that UAC is still off. - http://www.holdemmanager.net/faq/afmmain.aspx?faqid=73. If it is on, please turn it off and reboot.

    Turn off Windows Firewall for installing HM and PostgreSQL. Once you get those installed you can add exceptions to the firewall. If you have a 3rd party firewall, uninstall it completely before installing HM/SQL - http://www.holdemmanager.net/faq/afm...aspx?faqid=171

    1) Make a backup of your C:\Program Files\RVG Software\Holdem Manager\Config folder, and any other important files mentioned earlier.
    2) Uninstall HM with www.revouninstaller.com using the Deep settings.
    3) If given the option, on the 2 following screens of Revo, choose the Select All > Delete buttons to remove any registry entries and leftover files.
    4) Reboot your computer
    5) Install the complete setup of HM: http://www.holdemmanager.com/downloa...demmanager.zip
    6) Download the latest patch HM: http://www.holdemmanager.com/downloads/HmBetaUpdate.exe
    7) Test if it for a while and see if it work
    8) Close down Holdem Manager and copy the config folder from step 1 and copy and overwrite it to your C:\Program Files\RVG Software\Holdem Manager\Config folder, and import any notes and hands/database. Make sure you copy/paste the current \config folder before you overwrite it. If your old config folder causes problems, you can paste the default \config folder back in.
    9) Test if it works again for a while

    Not sure if I would bother with your old config folder, as that may be part of the problem.

Similar Threads

  1. Replies: 2
    Last Post: 10-13-2008, 02:54 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •