PDA

View Full Version : Did 3bet = true Filter seems way off



bogeydrvr
03-10-2009, 01:03 AM
It's very possible I am missing something easy here, but...

I have filter by stake and # of players (more than 2), and have a sample size of 48514 hands. My 3bet % is 6.7% in the report. Next, I add the filter "Did 3bet = TRUE", and it only returns 1150 hands.

What's up? 6.7% of 48k is over 3200. This is not even close.

Please help. Thanks.

Mike

BTW - I am running the new Beta (1.08 16). I did not try this report before installing the beta.

Al1
03-10-2009, 11:27 AM
To 3bet, you need an opportunity to do that. In a lot of hands from your 48K, you can't 3bet just because the pot is unopened etc...

Try the filter "Could 3bet = True" and in this case the 6.7% will match this sample.

bogeydrvr
03-10-2009, 07:37 PM
Thanks for the quick response.

After filter with "could 3bet = true", the "did 3bet = true" is, in fact, the 6.7% of that number. Everything works fine.

Thanks for the clarification.

Mike

nobody84
08-17-2009, 06:28 PM
i'm having the same problem but when i use "could 3bet" nothing changes. i have a sample size of just over 34k and a 3bet of around 4.5% so i'm expecting to get somewhere around 1700 hands but i only get 450 or so...

also, i can't seem to make a filter for ALL 3be tpots combined (i.e. "did 3bet" and "faced 3bet"). how can i combine the two?

netsrak
08-18-2009, 03:27 AM
I'm not so experienced with the Filters.
Please check the FAQ: http://www.holdemmanager.net/faq/afmviewfaq.aspx?faqid=123
and come back if you need further help.

nobody84
08-19-2009, 12:01 PM
unfortunately i couldnt solve the problem... basically i want to have a filter that shows me all the 3be tpots that i have been involved in.

fozzy71
08-19-2009, 01:11 PM
i'm having the same problem but when i use "could 3bet" nothing changes. i have a sample size of just over 34k and a 3bet of around 4.5% so i'm expecting to get somewhere around 1700 hands

You are not expecting the proper number.


(Did 3Bet) = (3Bet %)
(Could 3Bet)

Sample = 34,000

You can not take 4.5% of the entire sample. You have to take 4.5% of the hands where you had an opportunity to 3Bet, as explained earlier.


To 3bet, you need an opportunity to do that. In a lot of hands from your 48K, you can't 3bet just because the pot is unopened etc...

Try the filter "Could 3bet = True" and in this case the 6.7% will match this sample.


From your sample of 34,000, what is your (Could 3Bet = True) = ??

I am guessing about 10k hands

(Did 3Bet = True) = ~450

.045 =

450
x


.045x = 450


450
.045



but i only get 450 or so...

I am pretty sure this is accurate.



also, i can't seem to make a filter for ALL 3be tpots combined (i.e. "did 3bet" and "faced 3bet"). how can i combine the two?

I am not sure you can combine them, to be honest.

You could not 'face a 3bet' and actually 'did 3bet' in the same hand. I believe you will need to run a separate filter/report for each, but I am no filter expert either. If you need any more clarification, just ask and I will ask the developer to respond when he has time.





unfortunately i couldnt solve the problem... basically i want to have a filter that shows me all the 3be tpots that i have been involved in.


Did 3Bet = True would be every hand you ever 3Bet.

nobody84
08-19-2009, 10:07 PM
thx for the great explanation, i get it now... guess i have to run 2 seperate filters for both 3bet scenarios, no big deal really, was just wondering...