PDA

View Full Version : HUD on Merge Network- Lock Poker



Quincy3
05-18-2011, 11:10 AM
I have set up the client properly and configure everything. When I start HM and it starts importing, all the huds display in a group at the bottom of the screen. I tried to move them to each player by right clicking and draging. But it just pops back to the bottom of the screen. Any suggestions. Thanks Rod

Sarek
05-18-2011, 11:38 AM
Untick Table preferences - Lock the layout
this will "release" stat blocks

Quincy3
05-19-2011, 12:52 AM
I unticked lock layout and am able to move the stat boxes a little but it only goes a little and then disappears.

netsrak
05-19-2011, 04:26 AM
Are you using our latest release 1.11.06g? http://www.holdemmanager.com/Downloads/HmUpdate.exe

Please post a screenshot of a table and your table preferences.

fnord
05-20-2011, 08:44 PM
Are you using our latest release 1.11.06g? http://www.holdemmanager.com/Downloads/HmUpdate.exe

Please post a screenshot of a table and your table preferences.

I am using the latest release, but I have the following problem:
I play HUSNG's, table manager does not list any tables when I am playing, nor do I see any stats on the tables.

I see the tournaments and hands but it does something weird here, too:
It shows the 11.50 Holdem STTs as 10.50's, and I accidentally played an 11.50 NLOmaha stt, which shows up as an 11.50, but as a hold'em tourney (even though it looks like the hands show up as omaha hands.)

willwonka
05-20-2011, 09:28 PM
I am also having issues with merge/Lock.

HH seem to be working fine.

No HUD. If I go into Table Finder, I can see them; but can't get the red envelope thing to work to manually add them.

I am also up to date on 6g.

BTW.. Playing full ring Cash.

willwonka
05-20-2011, 10:29 PM
for what it is worth, I figured out what I was doing wrong with Red Envelope and it now works.

fnord
05-21-2011, 08:18 AM
I am using the latest release, but I have the following problem:
I play HUSNG's, table manager does not list any tables when I am playing, nor do I see any stats on the tables.

I see the tournaments and hands but it does something weird here, too:
It shows the 11.50 Holdem STTs as 10.50's, and I accidentally played an 11.50 NLOmaha stt, which shows up as an 11.50, but as a hold'em tourney (even though it looks like the hands show up as omaha hands.)

I got the hud to show up now.

armbrust
05-23-2011, 09:31 AM
My issue is when i open a second MTT, some HUDs are in the wrong player, but are ok in the original table.

fozzy71
05-23-2011, 09:38 AM
My issue is when i open a second MTT, some HUDs are in the wrong player, but are ok in the original table.

hud options > player preferences > appearance tab > [ ] fix my stats position, should be disabled.

Check this FAQ - http://faq.holdemmanager.com/questions/423/Setup+Preferred+Seating+for+Merge+Network

If none of that helps, Please attach your holdemmanager.config and prefs.xml file from C:\Program Files(x86)\RVG Software\Holdem Manager\Config. If your extensions are off you'll just see a file called holdemmanager and prefs. Windows hides 'known file extensions' by default. Configuring Windows To Show Extensions :: Scott Granneman (http://www.granneman.com/techinfo/windows/showextensions/)

- To attach it to a thread in the forums, look below the post reply button when you start a new thread and you'll see a manage attachments button.
- Click this and attach the file.

armbrust
05-23-2011, 05:42 PM
Had it enabled, tyvm.

armbrust
05-24-2011, 06:12 PM
I notice another issue: when you move a hud in 9 handed (mtt) it also does it in 10 handed (sng) and backward.

Patvs
05-24-2011, 08:57 PM
Rightclick on the table in TableManager and manually set it to 9 (or 10) handed for the two different tables.

highball
05-29-2011, 02:42 PM
Everything is importing and stats for all other players are showing.

How do I get my stats to show in the HUD??

Thanks!

Patvs
05-29-2011, 04:14 PM
setup the seating preferences: http://faq.holdemmanager.com/questions/34/PreferredSeating

Please update to the latest version - http://www.holdemmanager.com/Downloads/HmUpdate.exe

Are the HERO stats not displayed at all... (check if the HUD panel isn't behind another player's HUD panel... or they show up, but always start at 0/0/0 (this is normal... the hero HUD will always reset at a new table enabling you to track your table image)

redrumdafaGz
05-30-2011, 03:02 AM
I am also having issues with merge/Lock.

HH seem to be working fine.

No HUD. If I go into Table Finder, I can see them; but can't get the red envelope thing to work to manually add them.

I am also up to date on 6g.

BTW.. Playing full ring Cash.



Dido yo!!! wtf! I just bought this for the first time tonight, I just played a session aswell with no hud like ? how does this work? sooo frustrating! I used to use Poker edge, still have a sub for it, but bought this finally! and if anyone can help me figure this hud out, I have no hud at all?

netsrak
05-30-2011, 03:35 AM
* Please try updating to the latest version 1.11.06g
http://www.holdemmanager.com/Downloads/HmUpdate.exe

* Under Vista and Windows 7 make sure that holdemmanager.exe, hmhud.exe and dbcontrolpanel.exe are started as administrator. Run the windows explorer and navigate to your Holdemmanager installation directory. Right click the holdemmanager.exe, dbcontrolpanel.exe and the hmhud.exe executable and select "Run as admin" from the popup menu under compatibilty.

* If that doesn't help, please check this and answer and post the questions http://faq.holdemmanager.com/questions/48/My+HUD+Doesn't+Work

willwonka
05-30-2011, 08:57 AM
Dido yo!!! wtf! I just bought this for the first time tonight, I just played a session aswell with no hud like ? how does this work? sooo frustrating! I used to use Poker edge, still have a sub for it, but bought this finally! and if anyone can help me figure this hud out, I have no hud at all?

What I did was within the Table mananger, I selected Table..Table Finder.

Select your table from the list (if it is showing up.. in my case it was) and then drag the red envelope to your actual poker table. It then popped a message for me (which I forgot what it was... something about dbcontrol I think) and I said yes and that was it. I then started seeing my HUD stats.

stacks
06-03-2011, 11:00 AM
I've just started playing Merge, and configured my table settings yesterday and moved the stat boxes to where I wanted them.

Then I loaded up the tables today and noticed my 6max tables loaded perfectly, but my FR 9 handed tables were all messed up again. I then spent a few minutes putting the boxes in the correct places again, and when I sat at a new table, they were all messed up again!!

I'm using preferred seat and it's the same every time, so I'm not sure why the boxes are appearing in different places on the FR table.

The worst part is when I have multiple FR tables going, I can't really move any boxes anywhere because the boxes are in different spots on each table!!! Actually, same SPOT, but HEM can't figure out where I'm sitting and so if I move one player on one table to the correct position, on the other table, its the incorrect position.

Patvs
06-03-2011, 11:33 AM
Re-check your seating preferences: http://faq.holdemmanager.com/questions/34/PreferredSeating

Please update to the latest version - http://www.holdemmanager.com/Downloads/HmUpdate.exe


Rightc-click on the table name in TableManager and manually set the number of players.

netsrak
06-03-2011, 11:34 AM
Please follow this procedure to configure the hud positions:
configure the preferred seating of your pokerclient and the seating preferences in hm accordingly
* open one table, play at least one hand
* move the stats with the right mouse key to the correct positions
* table manager -> file -> save positions
* now you can open further tables but you will always have to play at least one hand for the stats being moved to the correct positions.

see our preferred seating faq:
http://faq.holdemmanager.com/questions/34/preferred+seating

ClutchCity
06-14-2011, 12:59 AM
I've had problems with Merge tournaments. I've done all of the steps in this thread including updating to the latest version and saving the seat preferences in table manager.

For some reason, however, most tournaments will display stats properly, but one tournament will be messed up. I'm not exactly sure what makes these other tournaments different from the rest of them, but if I'm playing 3-4 tournaments, one tournament always displays stats in the wrong positions. Does anyone else have this problem?

Patvs
06-14-2011, 01:06 AM
Update to http://forums.holdemmanager.com/releases/82571-1-11-07-pre-release.html

Try to right-click on the tournament in TableManager, and manually assign the:
HUD configuration
#players
to the table.

sudic
06-15-2011, 04:24 AM
I've tried everything but I still can't get the HUD to display.
I usually play heads up SNG or 6max.

HEM updates fine but it does not display the HUD.

I tried all the Faq suggestions. (table finder, lastest version, old version, check the directories, etc)>

A complete re-install pointing to a different DB didn't work.

Nothing seems to work.

I even work with the HEM HUD guy and HUSNG.
We couldn't get it to work.

Does HEM work with BCP(Black Chip Poker-Merge network)?

Thanks!

Patvs
06-15-2011, 07:57 AM
Yes, HM supports all Merge skins.

Update to: http://forums.holdemmanager.com/releases/82571-1-11-07-pre-release.html

Setup the seating preferences: http://faq.holdemmanager.com/questions/34/PreferredSeating

Go to the hud options--> player preferences--> use for tab and make sure a HUD configuration is assigned to Merge.
Go over ALL the OTHER HUD configurations to make sure there are no conflicting/overlapping settings.


Can you attach your holdemmanager.config file?

sudic
06-15-2011, 05:27 PM
Not sure what was the cause of the problem, but that last update seems to have cleared it up.

Thanks!

ccuster911
06-16-2011, 09:30 PM
I cant get HUD to work, I have the latest update(have downloaded it a few times....The hands import fine, the stats import fine, I just cant get the HUD. Also the tables do NOT appear in the table manager.

Patvs
06-17-2011, 08:30 AM
Is HoldemManager importing the handhistories?
Set the lobby language of the pokerclient in English.

Update to: http://forums.holdemmanager.com/releases/82571-1-11-07-pre-release.html

ccuster911
06-17-2011, 04:42 PM
Yes the hands are importing, but when playing nothing appears in table manager and a HUD doesnt pop up.

I downloaded the 1.11.07 Internal update and still nothing.

Patvs
06-17-2011, 06:08 PM
Read: http://faq.holdemmanager.com/questions/60/ConfiguringTableFinderToShowHUD

Can you post a screenshot of the poker table + TableManager window?

ccuster911
06-17-2011, 07:31 PM
Still Not working...

Heres some screen shots

http://shup.com/Shup/518184/111517193020-Lock-Poker-%2430-Turbo-Double-Up-6-Max-36262878-Table-1.png

http://shup.com/Shup/518187/111517193145-Snipping-Tool.png

Patvs
06-18-2011, 08:03 AM
Are these tables in mini-view??
Can you open them in their regular default size.

ccuster911
06-18-2011, 02:39 PM
They are in regular view. Everything with Lock Poker is as it should be. There has to be one little thing I am missing or doing wrong in terms of HEM.

Patvs
06-18-2011, 02:48 PM
Please schedule a remote support session with our support. Email support@holdemmanager.net, with a link to this thread and your forum name, so we can setup a Teamviewer (http://www.holdemmanager.net/teamviewer) session.

ClutchCity
06-22-2011, 12:46 PM
Try to right-click on the tournament in TableManager, and manually assign the:
HUD configuration
#players
to the table.

Thanks this helped a lot. The problem still occurs for random tourneys; however, manually setting the table to 9max fixes the problem.