PDA

View Full Version : Min sample for showing a stat (and other questions)



thomas13
11-15-2019, 05:33 PM
Hi HM Support,

1. how can I adjust that only stats are displayed with a min sample? Like show 3bet stat only when we have 5 or more history of this spot.

I'm sure the option is there but I can't find it.

2.

'163702

Here you can see small blinds RFI 3/6 and 1 limp so i assume there was 2/6 openfolds/folds in unopened pots. Is there a stat that shows me that? like openfold sb or fold sb unopened pot. I couldn't find any.

3. How can I make my Popups show up when hovering over a stat? i'd like to save time by not clicking and finding the right Popup I want to check.

Apart from that, I am satisfied with the program so far and am curious how it will develop over time!

Thanks in advance,

Thomas

udbrky
11-15-2019, 09:25 PM
This issue has been documented in detail and provided to the developers to resolve. If you want to be notified when it is fixed please send an email via the 'Contact Support' link (https://support.holdemmanager.com/) and include "Notify Me When HMT-3214 Is Resolved" in the subject line and body of the email.

fozzy71
11-16-2019, 09:46 AM
Hi HM Support,

1. how can I adjust that only stats are displayed with a min sample? Like show 3bet stat only when we have 5 or more history of this spot.

I'm sure the option is there but I can't find it.

Please follow the instructions below:


This issue has been documented in detail and provided to the developers to resolve. If you want to be notified when it is fixed please send an email via the 'Contact Support' link (https://support.holdemmanager.com/) and include "Notify Me When HMT-3214 Is Resolved" in the subject line and body of the email.



2.

'163702

Here you can see small blinds RFI 3/6 and 1 limp so i assume there was 2/6 openfolds/folds in unopened pots. Is there a stat that shows me that? like openfold sb or fold sb unopened pot. I couldn't find any.

I am not sure off the top of my head and none of the other guys on yet today to ask. Please include this as a separate question when sending a support ticket for notification about the other 2 feature requests are implemented and we can forward the question to our QA/Testing Manager to answer.



3. How can I make my Popups show up when hovering over a stat? i'd like to save time by not clicking and finding the right Popup I want to check.

Apart from that, I am satisfied with the program so far and am curious how it will develop over time!

Thanks in advance,

Thomas

This feature request has been documented in detail and provided to the developers for future consideration. *If you want to be notified if/when it is added please send an email via the 'Contact Support' link (https://support.holdemmanager.com/) and include "Notify Me When HMT-1361 Is Resolved" in the subject line and body of the email.

thomas13
11-20-2019, 07:03 PM
i have one more question.

i set different colors for stats. it goes from red to grey to green. but hm shows stats in white where it shows stats in the same category (29+) in the correct color (green).

163716

thanks for help

fozzy71
11-21-2019, 10:36 AM
i have one more question.

i set different colors for stats. it goes from red to grey to green. but hm shows stats in white where it shows stats in the same category (29+) in the correct color (green).

163716

thanks for help

Is this a hand from Stars? Amaya (PokerStars and Full Tilt) only allow 3 colors to be automatically assigned to a HUD stat.* HM3 will only color stats based on the first two color ranges and all other stat values will have the default color. The default color is the one set to Foreground for the stat in the HUD Editor - you can change it there to whatever color you would like.

What you need to do is set just two color conditions under "Color Ranges" and the third color will be the default color for the stat. This is the one set to Foreground for the stat in the HUD Profile Editor - you can change it there to whatever color you would like. The 3 color limit is per stat and not overall so, for example, you can use red/blue/green for VPIP and yellow/purple/pink for PFR e.t.c.

For example:
Set Foreground color to Green
Set first Color Range to Red for 1-30
Set second Color Range to Yellow for 31-70

Any number above 70 for that stat will be colored green.

thomas13
11-26-2019, 07:19 PM
Hello HM3 Support,

is it possible to show a stat in the HUD which is based on secific stacksize?

I'd like to see RFI from Button (I know how to set Button) and I'd like to see under 15bb for example.

Is this possible?

Thanks for response, Thoma

udbrky
11-26-2019, 10:03 PM
In stack sizes, choose the PFR unopened for that range. Then choose the Position.

thomas13
11-27-2019, 08:22 AM
Yea i can choose between default settings like 1-3bb or 4-6bb. but i will never have enough sample size to get usefull stats so I'd like to make my own settings like 0-10bb, 11-20bb etc. Is that possible? Thanks

udbrky
11-27-2019, 08:33 PM
You can use tournament filters in HUD Options to filter the stats.

thomas13
12-01-2019, 01:30 PM
HUD shows me 1100 hands for example. how can i set abbrevetions to see 1,1k etc? thanks for reply

fozzy71
12-02-2019, 10:33 AM
HUD shows me 1100 hands for example. how can i set abbrevetions to see 1,1k etc? thanks for reply

Replace the 'Total Hands' stat with the 'Total Hands Abbrev' stat.

https://www.dropbox.com/s/nw6rdfkli2sohz6/total-hands_abbreviated.png?raw=1

https://www.dropbox.com/s/o89rd0dt5xcodd1/Total%20Hands%20Abbrev%20stat%20thousands%20k%20re player.png?raw=1

thomas13
02-19-2020, 01:37 PM
Hello,

how can I filter hands that went to the showdown where Hero wasnt involved?

Thanks for reply

fozzy71
02-20-2020, 07:57 AM
Hello,

how can I filter hands that went to the showdown where Hero wasnt involved?

Thanks for reply


BettingLinePreflop1 = 'F' and NumberOfPlayersSawShowdown>=2

BettingLinePreflop1 is in the Filter Editor - Action Filters - Betting Lines - Preflop menu. NumberOfPlayersSawShowdown is not in the Filter Editor yet so it has to be entered manually using our HMQL Filter field and auto complete system.

You could also filter for:


SawFlop=false and NumberOfPlayersSawShowdown>=2

If you want to see hands where you made some actions preflop, but folded before the flop, and then the hand went to showdown regardless.

thomas13
03-02-2020, 11:21 AM
Hello,

I am looking for 'River Call Efficiency' stat. This should be around 1 which would mean my calls are break even. The range should be from like 0.5 (we lose a lot with calls) to 3 (we call to tight and win very often).

Where can I find that statistic? All 3 stats on the screenshot seem unrealitic to me.

Thanks for reply

163934

fozzy71
03-03-2020, 08:12 AM
This issue has been documented in detail and provided to the developers to resolve. If you want to be notified when it is fixed please send an email via the 'Contact Support' link (https://support.holdemmanager.com/) and include "Notify Me When HMT-5084 Is Resolved" in the subject line and body of the email.

thomas13
03-05-2020, 11:34 AM
Hello,

When I play around with filters it sometimes happens that HM3 changes independently between settings.

Here you can see the issue:


https://streamable.com/73g6n

How can I solve this?

Thanks for reply

fozzy71
03-05-2020, 11:49 AM
Please don't keep using this same thread for new questions. Start new threads for new issues/questions or better yet send them to us via the Send Feedback system in the left sidebar of HM3, or from under the Help menu, with details of the issues and your logs/config files and any screenshots or videos showing the issues as explained below.


Hello,

When I play around with filters it sometimes happens that HM3 changes independently between settings.

Here you can see the issue:


https://streamable.com/73g6n

How can I solve this?

Thanks for reply

Please reproduce the problem and click the 'Send Feedback' button from the left sidebar menu (or from the 'Help' menu at the top), or choose 'Yes' if prompted to submit an error report, and send your logs and config files with a detailed step by step description of the problem that we can use to try and reproduce the problem. You can then add any screenshots or other files by opening the support ticket on our site. Here is a direct link (https://support.holdemmanager.com/user/mytickets/) to your My Tickets page.

If you are unable to send the logs via the automated system for any reason you can collect and send the logs manually (https://support.holdemmanager.com/support/faqView/Holdem-Manager-3/194/How-to-send-HM3-log-files-to-support).

thomas13
04-01-2020, 12:43 PM
Hi,

HUD not working anymore on microgaming..

Even if I import the hand history file (GameHistory.dat) manually, no hands are visible in HM.

How can I solve it?

Thanks for reply

udbrky
04-02-2020, 02:59 AM
Please don't keep using this same thread for new questions. Start new threads for new issues/questions or better yet send them to us via the Send Feedback system in the left sidebar of HM3, or from under the Help menu, with details of the issues and your logs/config files and any screenshots or videos showing the issues as explained below.

Please reproduce the problem and:

a) Take a screenshot of the table/desktop before and after the problems
- Try to include the Live Play tab, Tools - Import details - Live Play and Errors, your poker client lobby and a browser page of this site visible in the screen shot.

b) Click the 'Send Feedback' button from the left sidebar menu, or from the 'Help' menu at the top, and send your logs and config files with a detailed description of the problem.
- Send the screenshots in the same/new support ticket the Send Feedback system generated for this issue. Here is a direct link to your My Tickets page (https://support.holdemmanager.com/user/mytickets/).
- Attach a copy of the original Hand history for the table with the issue*

With all the above information we should be able to narrow down what is causing the issue. If all the information is not included we will need to email you again to request it.

*All original hands that are auto-imported get moved to an archive for performance reasons. Your \HM3Archive is in C:\HM3Archive by default, but you may have put it anywhere. The archive should be organized by \Network\Month\DayOfMonth (example: C:\HM3Archive\SiteName\HM3Archive\2016\07\31). It is configured in the Tools - Settings - Import menu.