PDA

View Full Version : Can't make Prima import



hcb
10-06-2008, 01:08 PM
Hey Guys, I just spent 2 hours working on this, I've followed every FAQ and run several searches, so I hope this isn't repetitive. I've been using HEM with Eurolinx for several months with no problems. This weekend I had to reformat my hard drive, so I've just reinstalled HEM, postresql and Eurolinx, and now I cannot get the table manager to put stats up.

-All the appropriate boxes are checked or unchecked
-HEM imports hands successfully
-the table manager opens but does not show tables or put stats on the tables
-when I use the "launch active player detail window" feature, I do get all the correct information for the tables that are open.
-Basically it seems that everything works except the actual hud stats.
-I have the latest non-beta version of HEM.
-My firewall and processguard are permitting HEM, Eurolinx, and postresql.
-Everything works fine with Full Tilt.

Any suggestions? Thanks for the help.

morny
10-06-2008, 01:31 PM
Make sure youve followed this FAQ and then if your still having problems attach your holdemmanager.config file from C:\Program Files\RVG Software\Holdem Manager\Config folder and i look into it further.

Also try the table finder http://208.109.95.123/faq/afmviewfaq.aspx?faqid=54 and see if that works and make sure you have newest version http://www.holdemmanager.com/downloads/HmUpdate1.06.03h.exe

hcb
10-06-2008, 02:02 PM
Thanks a lot. File's attached. In case it matters, I copied the config folder before I reformatted and then replaced with the new one with it once I reinstalled.

morny
10-06-2008, 06:03 PM
Can we do a www.teamviewer.com session to sort the problem morny@holdemmanager.net

andersbak
10-14-2008, 06:37 AM
Hi

I have the same problem. Did you find a solution for this?

morny
10-14-2008, 01:59 PM
Make sure youve followed this FAQ and then if your still having problems attach your holdemmanager.config file from C:\Program Files\RVG Software\Holdem Manager\Config folder and i look into it further.

Also try the table finder http://208.109.95.123/faq/afmviewfaq.aspx?faqid=54 and see if that works and make sure you have newest version http://www.holdemmanager.com/downloads/HmUpdate1.06.04beta.exe

Also make sure youve checked the FAQ

rivernuts
10-19-2008, 07:52 PM
Do you guys have table mods? Everytime I add one to the new microgaming installations the table manager doesn't pick up the tables.

morny
10-21-2008, 05:55 PM
No, some of the smaller sites need to use Table finder the 1st time and then it will auto pick up tables after that

rivernuts
10-21-2008, 06:11 PM
what is table finder?

Here's what I did, I installed the software from both Eurolinx and Pokertime using their new installer, I then got HM to work perfectly with both. I then added a simple card or table mod to both, after that the table manager wouldn't pick up the tables. I also reinstalled a microgaming skin which didn't upgrade to the new installer, installed the mods and got HM to work perfectly.

morny
10-21-2008, 06:23 PM
http://208.109.95.123/faq/afmviewfaq.aspx?faqid=54 Table Finder

I thought you were asking were we at Holdem Manager using something in the program that changes the table mods:o

Not sure what they could change that would effect that

rivernuts
10-21-2008, 06:35 PM
Works fine now, thanks for the help.