PDA

View Full Version : ipoker - no 6Max 10Max diference



Njdsousa
08-30-2008, 02:31 PM
Dears Sirs,

I just bought your program and i noticed the following:
The HUD does not recognise 6 max (treat all hand as 10 max tables...)

Can you help me?

(I have the last versioon as i only bought the program yesterday!)

fabio
08-30-2008, 02:37 PM
Are you sure you downloaded the update also?

http://www.rvgsoftware.com/hm/hmupdate1.06.02.exe

Njdsousa
08-30-2008, 07:03 PM
Are you sure you downloaded the update also?

http://www.rvgsoftware.com/hm/hmupdate1.06.02.exe

Off course... if i downloaded it today ;)

spider
08-31-2008, 09:36 AM
Hi Njdsousa

I downloaded yesterday too and made the same assumption but in fact the full download is 1.06.1e.

You now need to download the update to 1.06.2. found on same download page, 2nd option.

Hope this helps

Spider

Njdsousa
08-31-2008, 10:56 AM
Hi Njdsousa

I downloaded yesterday too and made the same assumption but in fact the full download is 1.06.1e.

You now need to download the update to 1.06.2. found on same download page, 2nd option.

Hope this helps

Spider

If you read what answered before, i have that version...

And i still don't have a solution for this!!! :mad:

morny
08-31-2008, 04:04 PM
This is normal. HM counts the players at the table so if there is 8 players it will assume its full ring and if theres 6 players it will assume its 6max but it will show x/10 on the table manager.

MartinBKK
09-06-2008, 03:08 AM
No this isnt a solution and HM has had this problem since day one.

I am still seeing annoying messages with "seat 7" and "seat 9" periodically even when im playing a 6 max table. These clutter the table and are extremely annoying.

HM need to make changes so you can define the table manually. Currently you cannot do this and it is a real pain.

morny
09-06-2008, 06:09 AM
These stats only appear for a few seconds and then disappear after you first sit at a table or the no of players change but they will disappear, other than that everything works fine

Zami80
09-21-2008, 08:25 AM
I use iPoker miniview tables and the 6-max tables are not regognized, and if I mark them as 6-max manually, the setting only is in effect until the next hand, and it becomes a 10-max table again. I have 1.06.03h, should i downgrade?

morny
09-21-2008, 11:43 AM
Ipoker and Prima recognise all tables as 10 max and we dont have a fix for that currently. You can change it manually through Table finder by right clicking on the table and it will use the configuration you want but if you specify 2 layouts for 1 it will revert back after the next hand, for example say you set it to use the 6mac layout youve configured but you have 6max NL ticked in 2 different layouts then it will revert to the default so make sure there is no overlapping between configurations

Its also explained here: http://208.109.95.123/faq/?f=135

Zami80
09-21-2008, 01:23 PM
I have configured other layout for full tables and other one for 6-max, but it still always is regognized as 10-max.

morny
09-21-2008, 06:17 PM
Yes the table manager will say x/10 but you can manually change it to use another layout by following the last step in the FAQ http://208.109.95.123/faq/?f=135

Lets say youve made 2 configurations called 6max for 6max play and 10max for 10max play.

So if you have a 6max table running and its giving you a 10max layout, then right click on that table and choose 6max instead of 10max. The table will still say x/10 but it will now load the 6max layout. Do you understand?

Zami80
09-22-2008, 04:20 AM
Yes the table manager will say x/10 but you can manually change it to use another layout by following the last step in the FAQ http://208.109.95.123/faq/?f=135

Lets say youve made 2 configurations called 6max for 6max play and 10max for 10max play.

So if you have a 6max table running and its giving you a 10max layout, then right click on that table and choose 6max instead of 10max. The table will still say x/10 but it will now load the 6max layout. Do you understand?

Yes, I understand and that is exactly what I do, and everytime the table resets itself back to 10-max when a new hand is starting.

edit: I use default configuration for 10-max and another configuration for 6-max, that shouldnt make a difference right?

edit2: someone else had the same problem here http://208.109.95.123/forum/showthread.php?t=1521&highlight=miniview&page=2
I have to have 2 different lay outs cause i play full and 6-max mixed, and the layout for full tables does not work on the 6-max tables, the stats go into wrong places.

Zami80
09-22-2008, 09:49 AM
http://zami80.lite.fi/pictures/full.jpg

http://zami80.lite.fi/pictures/6max.jpg

morny
09-22-2008, 01:48 PM
Weird, looks correct there, i can do a www.teamviewer.com session if youd like to take a look morny@holdemmanager.net. In the meantime can you try using the opposite setup. Ie choose 6 max as the default configuration and then choose HU and full as a 2nd config and see if that makes any difference.

dergitarrist
09-23-2008, 10:31 AM
This sends me to fkn tilt like every other session where I mix in some of the 8max games on iPoker to get enough good tables opened.. I can fix it by telling table manager these are 9max and these are 6max and everything looks ace for a few seconds then it goes back.

morny
09-23-2008, 03:12 PM
8 max table arent supported, if its 6max 9 max and your still having a problem email me and ill try and sort it out

Zami80
03-17-2009, 05:38 AM
edit: yea it works now, forget it :)