cannot get new update to work :(

[bl00dy sputum]

hi i had been using beta 23 fine for the past few weeks when i tried to download the newest version i could use UB on HEM as well.

as it was installing ( while the green bar is moving from left to right ) it stopped several times and said certain files were not found. if you clicked ok or continue it continued and installed the entire thing.
upon opening the newer version i get an error message that says,

"unhandled exception has occurred in your application. if you click continue, the application will ignore this error and attempt to continue. if you click quit, the application will close immediately."

if you click ignore the HEM box opens and says "initializing" it just freezes and never opens.

under the error message if you click details it says the following..

See the end of this message for details on invoking
just-in-time (JIT) debugging instead of this dialog box.

************** Exception Text **************
System.IO.FileLoadException: Could not load file or assembly 'HEMGUI, Version=1.0.0.0, Culture=neutral, PublicKeyToken=null' or one of its dependencies. The located assembly's manifest definition does not match the assembly reference. (Exception from HRESULT: 0x80131040)
File name: 'HEMGUI, Version=1.0.0.0, Culture=neutral, PublicKeyToken=null'
at HoldemManager.ԛ.ԝ()
at HoldemManager.ԛ..ctor(Ӧ LoadingForm)
at HoldemManager.Ӧ.፞(Object ԥ, EventArgs Ԧ)
at System.Windows.Forms.Timer.OnTick(EventArgs e)
at System.Windows.Forms.Timer.TimerNativeWindow.WndPr oc(Message& m)
at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)

WRN: Assembly binding logging is turned OFF.
To enable assembly bind failure logging, set the registry value [HKLM\Software\Microsoft\Fusion!EnableLog] (DWORD) to 1.
Note: There is some performance penalty associated with assembly bind failure logging.
To turn this feature off, remove the registry value [HKLM\Software\Microsoft\Fusion!EnableLog].



************** Loaded Assemblies **************
mscorlib
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.3074 (QFE.050727-3000)
CodeBase: file:///C:/Windows/Microsoft.NET/Framework/v2.0.50727/mscorlib.dll
----------------------------------------
HoldemManager
Assembly Version: 1.8.0.0
Win32 Version: 1.8.0.0
CodeBase: file:///C:/Program%20Files/RVG%20Software/Holdem%20Manager/HoldemManager.exe
----------------------------------------
System.Drawing
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.3053 (netfxsp.050727-3000)
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Drawing/2.0.0.0__b03f5f7f11d50a3a/System.Drawing.dll
----------------------------------------
System
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.3053 (netfxsp.050727-3000)
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System/2.0.0.0__b77a5c561934e089/System.dll
----------------------------------------
System.Windows.Forms
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.3053 (netfxsp.050727-3000)
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Windows.Forms/2.0.0.0__b77a5c561934e089/System.Windows.Forms.dll
----------------------------------------
DevComponents.DotNetBar2
Assembly Version: 7.9.9.3
Win32 Version: 7.9.9.3
CodeBase: file:///C:/Program%20Files/RVG%20Software/Holdem%20Manager/DevComponents.DotNetBar2.DLL
----------------------------------------
HMClass
Assembly Version: 1.0.0.0
Win32 Version: 1.0.0.0
CodeBase: file:///C:/Program%20Files/RVG%20Software/Holdem%20Manager/HMClass.DLL
----------------------------------------
System.Xml
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.3074 (QFE.050727-3000)
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Xml/2.0.0.0__b77a5c561934e089/System.Xml.dll
----------------------------------------
Accessibility
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.3053 (netfxsp.050727-3000)
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/Accessibility/2.0.0.0__b03f5f7f11d50a3a/Accessibility.dll
----------------------------------------
DeployLX.Licensing.v3
Assembly Version: 3.1.2000.0
Win32 Version: 3.1.2000.19262
CodeBase: file:///C:/Program%20Files/RVG%20Software/Holdem%20Manager/DeployLX.Licensing.v3.DLL
----------------------------------------
System.Configuration
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.3053 (netfxsp.050727-3000)
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Configuration/2.0.0.0__b03f5f7f11d50a3a/System.Configuration.dll
----------------------------------------
System.Web
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.3074 (QFE.050727-3000)
CodeBase: file:///C:/Windows/assembly/GAC_32/System.Web/2.0.0.0__b03f5f7f11d50a3a/System.Web.dll
----------------------------------------

************** JIT Debugging **************
To enable just-in-time (JIT) debugging, the .config file for this
application or computer (machine.config) must have the
jitDebugging value set in the system.windows.forms section.
The application must also be compiled with debugging
enabled.

For example:

<configuration>
<system.windows.forms jitDebugging="true" />
</configuration>

When JIT debugging is enabled, any unhandled exception
will be sent to the JIT debugger registered on the computer
rather than be handled by this dialog box.


help me please.. thank you

[bl00dy sputum]

anyone?

[fozzy71]

....

as it was installing ( while the green bar is moving from left to right ) it stopped several times and said certain files were not found. if you clicked ok or continue it continued and installed the entire thing.
upon opening the newer version i get an error message that says,.......

Did it say not found, or 'couldn't be replaced'? Are you sure you were installing the beta to the same location as the original installation of HM?


1) Clear your web cache, and download the beta update again, with another browser if possible.
2) Right-Click > Save Link As to save it to a different folder.
3) Reboot, and run the installer first thing.
4) Make sure the update is installing to the proper \holdem manager folder

[fozzy71]

If that doesn't work you may need to do a complete reinstall of HM.


Before you uninstall HM:

I want to re-install Holdem Manger without losing all of my settings and preferences. Can this be done? - http://www.holdemmanager.net/faq/afmviewfaq.aspx?faqid=98

You want to make sure you backup your Processed/Archived hand histories, your entire \config folder, and your exportednotes file. http://www.holdemmanager.net/faq/?f=119. I usually just copy my entire \Holdem Manager directory.

I would also make sure you manually export the database to hand history text files:

HM > Options > Database Management > Connect > Export Hands

How do I export or import hands into and from Holdem Manager? - http://www.holdemmanager.net/faq/afmviewfaq.aspx?faqid=173

Make sure you copy that folder as well as the other stuff I mentioned.

This helps to insure that if anything goes wrong with the backup/restore, you can manually import the exported files to rebuild.



1) Make a backup of your C:\Program Files\RVG Software\Holdem Manager\Config folder, and any other important files mentioned earlier.
2) Uninstall HM with www.revouninstaller.com using the Moderate or Deep settings.
3) If given the option, on the 2 following screens of Revo, choose the Select All > Delete buttons to remove any registry entries and leftover files.
4) Reboot your computer
5) Install the complete setup of HM: http://www.holdemmanager.com/downloads/holdemmanager.zip
6) Download the latest patch HM: http://www.holdemmanager.com/downloads/HmBetaUpdate.exe
7) Test if it for a while and see if it work
8) Close down Holdem Manager and copy the config folder from step 1 and copy and overwrite it to your C:\Program Files\RVG Software\Holdem Manager\Config folder, and import any notes and hands/database.
9) Test if it works again for a while

[bl00dy sputum]

Did it say not found, or 'couldn't be replaced'? Are you sure you were installing the beta to the same location as the original installation of HM?


1) Clear your web cache, and download the beta update again, with another browser if possible.
2) Right-Click > Save Link As to save it to a different folder.
3) Reboot, and run the installer first thing.
4) Make sure the update is installing to the proper \holdem manager folder

this worked. thank you very much

[fozzy71]

Good news. Make sure you read over the beginning of my other post about backing up HM data and preferences. It's a good idea to back that stuff up regularly, as well as doing occasional PostgreSQL backups.