PDA

View Full Version : HUD @ ENET Network



rock14
09-24-2011, 01:20 AM
Hi,

Is there a chance to make support for the enet network?

aka: http://www.italianmaxclass.com

;;; edit
Ops, should have searched before..
But, this is still in the to do list, or was droped out becouse it is a small network??

Patvs
09-25-2011, 02:59 AM
It's still on the to-do list.
Currently with a low priority, since the network is relatively small. So other bug fixes are fixed first.

djo
10-05-2011, 04:50 AM
enet has 5k+ players at peak times and is growing rapidly.
the software they use is the same as the yatahay network so it would be catching two networks at the same time.
pt3 supports these out of the box.

would be greatly appreciated if support for this can be added asap. would make me move to hem for sure.

CardPlay3r
10-05-2011, 05:04 AM
I play exclusively on Enet, using PT3 but I would buy HEM if it supported Enet, because it's easier to work with the HUD and weaktight supports the connection to HEM database/HEM replays among other things. So wondering if you want to make the priority a bit higher

skaplun
10-05-2011, 05:29 AM
please add hem support to enet, I'm also a grinder that now uses PT3 just due to that network.
Its a shame that your superior product is unusable to many grinders only because of some conversion issues.

But I'm sure you'll take care of it,
thanks in advance.

Stanley VII
10-05-2011, 09:27 AM
If it matters, I vote for HM support to Enet too, now I use PokerTrakcer 3 only because of its support of Enet, but I liked HM more.

Sarek
10-05-2011, 01:20 PM
This is in "to-do" list, but is very hard to give ETA for finish.

CardPlay3r
10-06-2011, 08:50 AM
Sarek, we are just asking for the priority given on the to-do list to be increased, since your collegue confessed it is on a low priority. Any chance of that? Thanks.

djo
11-05-2011, 07:39 AM
now with hem2 out and enet gaining more and more popularity (passed pkr and everleaf, very close to cake), can this be pushed forward?
as a reminder the software is the same as the yatahay network so developing support for enet will accomplish more than just that. in addition, pt3 supports these.

thanks!

Patvs
11-05-2011, 10:37 PM
Adding this network is also on the to-add list for HM2.
It will be added AFTER the main HM2 bugs are fixed.

CardPlay3r
11-10-2011, 11:06 PM
Adding this network is also on the to-add list for HM2.
It will be added AFTER the main HM2 bugs are fixed.

Thanks for the new info. Could you please give an estimate as to when you think enet support will be added roughly?

Patvs
11-13-2011, 11:18 PM
I have no eta for this. Currently we're swamped with fixing main HM2 bugs.

kamachos
11-16-2011, 09:12 PM
HEM is losing many customers over this. Currently, PT3 supports both Yatahay and ENET and they use the same software. Many people will be choosing to upgrade to PT4 and not getting HM2. Enet and Yatahay together combine for a HUGE customer base of 7-8k players at peak times. This should seriously be one of the TOP priorities. This is the only way PT gets an edge over HEM.

djo
11-17-2011, 08:26 AM
HEM is losing many customers over this. Currently, PT3 supports both Yatahay and ENET and they use the same software. Many people will be choosing to upgrade to PT4 and not getting HM2. Enet and Yatahay together combine for a HUGE customer base of 7-8k players at peak times. This should seriously be one of the TOP priorities. This is the only way PT gets an edge over HEM.

This, this, this.

djo
12-09-2011, 07:49 AM
once a month bump

Lefort48
12-11-2011, 02:07 PM
Yeah hate to be a pest but this network is easily the fastest growing one at the moment with 10k+ players regularly.. might wanna consider making it a bit more of a priority.. i for one got PT3 just for the site (but will remain loyal to HM in the end cuz I like the software/support better) but I imagine a lot of people probably doing the same and moving to PT..

Patvs
12-11-2011, 05:15 PM
ENET support has moved to the near top of the priority list.
It will be added, after the main HM2 bugs are fixed.

Fila77
12-14-2011, 08:32 AM
HEM is losing many customers over this. Currently, PT3 supports both Yatahay and ENET and they use the same software. Many people will be choosing to upgrade to PT4 and not getting HM2. Enet and Yatahay together combine for a HUGE customer base of 7-8k players at peak times. This should seriously be one of the TOP priorities. This is the only way PT gets an edge over HEM.
It completely agree, I too use at present PT3, I am going to study it in more details. I hope for support of a network enet in the fastest time. Players more than you think.

H_S
12-14-2011, 11:50 AM
I am also having my 60 day trial of PT3 and I'm accustomed to HM and wasn't really into PT3 at first. Now that I've been using PT3 for awhile I'm starting to feel better about it and considering the fact there will soon be a new version of the software, PT4, I might just upgrade to the real thing. This of course if HM doesn't come up with Enet support before my trial expires. With all this said, I would still rather keep HM as the software of choice, so please add Enet as soon as possible.

Miracle
12-23-2011, 01:05 PM
+1
Add plz.

JimmyChances
12-25-2011, 09:37 AM
I am also having my 60 day trial of PT3 and I'm accustomed to HM and wasn't really into PT3 at first. Now that I've been using PT3 for awhile I'm starting to feel better about it and considering the fact there will soon be a new version of the software, PT4, I might just upgrade to the real thing. This of course if HM doesn't come up with Enet support before my trial expires. With all this said, I would still rather keep HM as the software of choice, so please add Enet as soon as possible.

would like to see this site configured for HEM2 also.

smutgremlin
12-29-2011, 09:00 PM
I am also having my 60 day trial of PT3 and I'm accustomed to HM and wasn't really into PT3 at first. Now that I've been using PT3 for awhile I'm starting to feel better about it and considering the fact there will soon be a new version of the software, PT4, I might just upgrade to the real thing. This of course if HM doesn't come up with Enet support before my trial expires. With all this said, I would still rather keep HM as the software of choice, so please add Enet as soon as possible.

Long time HM user. Would love to see this feature as well.

pokdiego
01-03-2012, 12:25 PM
+1000

winhop
01-09-2012, 06:04 PM
+1000

Switching to PT3
01-11-2012, 03:30 PM
You people have dragged your feet on this issue for too long now. The people whose constant requests you're ignoring are the same people who bought HM when it first came out and you were fighting for market share against PT3.

Insisting that we all get to the back of the line while you spend all your resources trying to patch an overly 'buggy' new product is unreasonable, and I think a bad business decision.

Switching to PT3
01-22-2012, 06:21 PM
Great to see you guys are making this such a high priority.

Thanks.

BeatNick
01-31-2012, 09:04 AM
Any updates on this?

High priority doesn't seem all too high after all. Reward / effort is huge on this one, no idea why you guys don't add enet.

Switching to PT3
01-31-2012, 02:42 PM
One, Two, Three, Four, What the hell are we waiting for?
Five, Six, Seven, Eight, ENET HUD, don't make us wait.
Nine, Ten, Eleven, Twelve, Into HM Data I duly delve.
Thirteen, Fourteen, Fifteen, Sixteen, ENET stats can not be seen.
Seventeen, Eighteen, Nineteen, Twenty, Have we paid? Oh yes, and plenty.
Twenty One, Twenty Two, Twenty Three, Twenty Four, We ain't paying Roy no more.

Well done guys. PT3 shipped today. I'm sure you'll lose more HM users over this issue.

Patvs
01-31-2012, 05:24 PM
ENET/Yatahay support will be added in a FUTURE update. It's on the to-add list.
Other bug fixes currently have a higher priority to be added/fixed first.

HoldemManager never supported ENET, so I don't understand this 'Have we paid? Oh yes, and plenty" argument.
You purchased HoldemManager not supporting ENET.

Other argument: "The people whose constant requests you're ignoring".
We have hundreds of other requests. We're currently focusing on fixing all critical bugs for networks that were already supported, before adding a new one.

Switching to PT3
01-31-2012, 05:33 PM
Enet is one of the few networks where US based players can still play. It would be nice for the powers that be at HM to make it so we can still actually use the program that we bought.

lastgamer
02-07-2012, 07:11 PM
Did you already make it ?

Patvs
02-07-2012, 10:10 PM
ENET support will be added in a future update.

T88
02-15-2012, 06:31 AM
Is it done? Iīm gonna buy PT3 or HM2 today or tomorrow

JimmyChances
02-15-2012, 07:08 AM
Is it done? Iīm gonna buy PT3 or HM2 today or tomorrow
You'll need poker planer HH converter with HEM2.

T88
02-15-2012, 07:28 AM
Thanks Jimmy, this?

HH Converter (http://www.hhconverter.com/)

JimmyChances
02-15-2012, 07:42 AM
Thanks Jimmy, this?

HH Converter (http://www.hhconverter.com/)

No, go on 2+2 forums and search for poker planer. It works great with HEM2. And HEM2 is a better piece of software than PT4, i've tried them both. So i think the enet hand convertor that comes with the planer is +EV.

Norman777
02-19-2012, 06:30 AM
ENET support will be added in a future update.
When will Enet support appear? I'm waiting for it most of all.

Patvs
02-19-2012, 06:34 PM
Work on supporting ENET will start after the HM2.01 update.
I have no eta for this. It will be added when all priority-1 bugs (affecting other sites) are fixed.

metaddict
02-23-2012, 10:09 AM
Just chiming in with the people requesting HEM support for ENET :) I know it's on the to-do list but the more the merrier.

KntFoldem
03-09-2012, 11:43 AM
Any idea when this is happening yet? When it does will it convert existing HHs or will it only convert on-the-fly?

Patvs
03-09-2012, 02:42 PM
When ENET is supported, HoldemManager can import all your old handhistories.
Do make sure ENET is saving your handhistories:

From the Enet lobby click on Options > View Hand History.
Click on the Options button.
Check Save Hand History.
Click OK to save the settings.

lastgamer
03-09-2012, 03:29 PM
Is it working now with the last version ?

Patvs
03-09-2012, 03:38 PM
ENET support will be added in a future update.

But already make sure ENET is saving all your handhistories.

yonchev
03-13-2012, 06:54 PM
Does that mean that when you guys are ready with the enet support, i can use it on HM1?
Im really looking forward to HM1 enet support.

Thanks

Patvs
03-13-2012, 07:16 PM
It's unlikely ENET support will be added to HM1.

It will only be added to HM2.

cyraxsmoke
03-22-2012, 12:46 PM
It's unlikely ENET support will be added to HM1.

It will only be added to HM2.


any news please ? Q_Q

Switching to PT3
03-22-2012, 04:12 PM
It's unlikely ENET support will be added to HM1.

It will only be added to HM2.

This is quite possibly the lamest and most pathetic of all possible outcomes. You saw there was a high demand for this, and so you decide to f*** everyone and squeeze more money out of them.

When I got HM 1, I did it because PT3 wasn't very good, and their customer service was bad. Now, as I return to PT3, I'm doing so because of this debacle and the way the PR has been handled by the HM staff.

So, so bad.

Patvs
03-22-2012, 09:56 PM
HM1 never supported ENET.
And HM1 besides critical updates, to keep it running on supported sites, won't receive new features / new added networks.

cyraxsmoke
03-23-2012, 05:48 AM
HM1 never supported ENET.
And HM1 besides critical updates, to keep it running on supported sites, won't receive new features / new added networks.


I dont mind HM1, just asking 4 the 2

olliepower
03-24-2012, 10:55 PM
It will be added to HM2.

tfsantos
04-10-2012, 01:37 PM
It will be added to HM2.

When?

Patvs
04-11-2012, 12:06 AM
I have no eta when this will be added.

matss
05-06-2012, 07:59 PM
H e l l o h o l d e m m a n a g e r s u p p o r t

w h e n y o u g u y s w i l l a d d t h e e n e t h u d?
Y o u a r e l o s i n g c u s t o m e r s b e c a u s e o f t h i s.

G r e e t z m a t s s

(p.s.: I g o t o p t 3)

Patvs
05-06-2012, 08:24 PM
We now have an ETA, of adding support for this before the end of may.

Fortify
05-16-2012, 02:53 PM
In HM1 too?

Patvs
05-17-2012, 11:19 PM
Yes for both HM1 and HM2.
(note: I haven't seen the programmers start on working on ENET, so I have my personal doubts they'll make the pre-set deadline)

Fortify
05-18-2012, 02:59 AM
Yes for both HM1 and HM2.
(note: I haven't seen the programmers start on working on ENET, so I have my personal doubts they'll make the pre-set deadline)
Pat,

I think it's admirable that you've chosen not to leave your HEM1 users in the dark. Personally, I'm pretty sure that right there kept me as a customer to HM rather than get PT4 vs HM2.

That shows loyalty to your customers and class as a brand. Kudos to you for that

new2hem
05-23-2012, 05:42 AM
any news on enet hud? its almost the end of hte month

djo
05-23-2012, 02:20 PM
please please make this finally happen

sideshow
05-25-2012, 07:32 AM
Hi,

Unfortunately as of now we can't give you an ETA of when the release will be.

Thanks
Holdem Manger Support

JimmyChances
05-25-2012, 09:10 AM
Hi,

Unfortunately as of now we can't give you an ETA of when the release will be.

Thanks
Holdem Manger Support

It seems strange that you have Everleaf support where there's only about 5 tables running maximum even at peak times
on any limit. But Enet has a much larger cash game player base but there is no HEM support for it. Anyways, I hope you
decide to rectify this soon. Lots of potential customers there.

matss
05-25-2012, 12:00 PM
We now have an ETA, of adding support for this before the end of may.


Hi,

Unfortunately as of now we can't give you an ETA of when the release will be.

Thanks
Holdem Manger Support



Holdemmanager guys are so f***ing funny.

Patvs
05-26-2012, 05:25 AM
We have an internal end of may deadline.
But as stated in an earlier post, I haven't actually seen programmers work on this issue.

Daniel1941
05-31-2012, 05:14 AM
So??? Today is the end of May.

matss
05-31-2012, 07:06 AM
YEAH BRING IT ON HOLDEMMANAGER!
I want to play enet on my laptop but I don't want to buy a second license from that scumbag from PokerPlaner.
GRTZ MATS

cordaci
05-31-2012, 10:55 AM
it is literally the end of may :) i`m depositing as we speak on enet and wouldnt like to spend 90 $ on pt3 only for that :(

matss
06-05-2012, 05:35 PM
Hello Holdemmanager
u there?

udbrky
06-05-2012, 08:54 PM
We have announced this in the winner poker/yatahay thread, which uses the same HH's:

The adding of support for ENET will begin after we release the update that I referenced above we are targeting in the next couple of weeks.

One reason that it has not been started already is we were waiting on documentation from the network on the hand history formatting but have not received it. If you and other user's will also ask that they respond to that request it will make the process go much quicker.

As it stands, we have all the hands we need but will have to manually determine all of the rules and standards they are using in their current hand history formats. Something we can definitely do but it is not as efficient and thus will take longer.

Thanks

Jim

rkt1337
06-07-2012, 10:13 AM
We have announced this in the winner poker/yatahay thread, which uses the same HH's:

The adding of support for ENET will begin after we release the update that I referenced above we are targeting in the next couple of weeks.

One reason that it has not been started already is we were waiting on documentation from the network on the hand history formatting but have not received it. If you and other user's will also ask that they respond to that request it will make the process go much quicker.

As it stands, we have all the hands we need but will have to manually determine all of the rules and standards they are using in their current hand history formats. Something we can definitely do but it is not as efficient and thus will take longer.

Thanks

Jim


I have a few emails with enet that have been waiting for 3 and a half months. Dont wait up on them, they wont ever reply.

new2hem
06-15-2012, 10:56 AM
any update? i hope you release one soon. i dont want to buy PT3 but will have to if you dont make one. and ill tell all my new friends to buy PT3 instead

rkt1337
06-15-2012, 11:02 AM
any update? i hope you release one soon. i dont want to buy PT3 but will have to if you dont make one. and ill tell all my new friends to buy PT3 instead

PT4 is free and there is a hand converter available for HEM 1 and 2

new2hem
06-18-2012, 01:19 PM
where can i find the hand converter for hem1 and hem2 on pt4?

Patvs
06-19-2012, 07:06 PM
There should be a thirdparty hand converter, look for it on 2+2 software subforum.

fozzy71
06-19-2012, 09:37 PM
where can i find the hand converter for hem1 and hem2 on pt4?


There should be a thirdparty hand converter, look for it on 2+2 software subforum.

pt4 > tools > setup assistant > convert holdem manager database

ENET support is still high on our list of priorities but unfortunately there are other more critical issues we need to address before we can free up developer time to address this new site support.

chico
06-20-2012, 09:41 AM
Can u write some true deadline to not make us checking this thread every day?

fozzy71
06-20-2012, 04:15 PM
Can u write some true deadline to not make us checking this thread every day?

If I could, I would. Unfortunately I can't give any sort of specific ETA at this time. Once we have more info we will post it in this thread.

matss
06-22-2012, 12:28 PM
Updeet pliz

fozzy71
06-22-2012, 09:04 PM
Updeet pliz

Nothing has changed in the past 2 days on this topic since my last update.


If I could, I would. Unfortunately I can't give any sort of specific ETA at this time. Once we have more info we will post it in this thread.

chico
07-01-2012, 02:19 PM
Any progress? I know there is holiday time right now, but i guess :P it is not a big deal to add 1 site for specialists u have - isn't it?

fozzy71
07-01-2012, 02:41 PM
We are in the middle of trying to get a new release out for HM2 hopefully this coming week. After that release we have a major HM2 upgrade planned to improve overall HM2 performance by changing the RAM usage to a Hybrid method to reduce RAM/CPU use and by replacing the Datagrid system we are using for improved performance within the program when changing tabs/reports. Some time in between those HM2 updates we hope to release another minor HM1 update with some fixes that did not make it into the last HM1 update. None of those updates will contain ENET support.

Unfortunately, as we mentioned earlier in this thread, we can not try to add support for a new network until the new major HM2 upgrade is released due to developer commitments. We are hoping the new hybrid/datagrid update is only a few weeks away but these types of major updates often take us longer than expected. I realize this is not the reply you were hoping for but I am trying to be as honest as I can. The things we are working on right now affect a large portion of our customer base and can not take a back seat while we work on adding support for a new network with relatively low traffic by comparison.

apo
07-04-2012, 12:39 PM
I'm also waiting for Enet support. I am using pt at a moment because i play at enet, but i don't like it.. AT ALL.
I just want to say thanks for your work. I'll buy HEM2 when enet support releases.
I don't use much pc programs but my opinion is that HEM is best software i have ever used after Excel. Good work =)
Thank You!

djo
07-05-2012, 09:00 AM
guys... enet and winning networks popularity is raising. there are hand histories available. this has been requested for over a year. please get it done. i'm an affiliate and stable owner and i know many players are moving away from hem because of this.

idontcarejustletme
07-05-2012, 05:25 PM
I have no eta for this. Currently we're swamped with fixing main HM2 bugs.

This isn't directed at you or fozzy or anyone else in particular; I know you guys are trying. But tbh, I just don't care that the developers are swamped fixing bugs. Maybe you shouldn't have released a product that was so god damn buggy in the first place.

I probably sent an email a week to HM2 people about the multitude of problems I was having with HM2 and 5050 poker. Maybe 15% of them were resolved over the ~4 months that I was pestering you. That site gets booted from the network and now I switch to enet to find that you guys don't even support it. I just don't care. Hire more developers. Make them work double shifts. Just fix it ffs. It is seriously the most tilting program I have ever used.

fozzy71
07-06-2012, 03:09 PM
We are expecting to add support in August but this will be for HM2 only and not HM1.

matss
07-06-2012, 06:31 PM
We are expecting to add support in August but this will be for HM2 only and not HM1.

'Expecting' :)

djo
07-06-2012, 08:12 PM
more like :(

Fortify
07-11-2012, 06:13 AM
We are expecting to add support in August but this will be for HM2 only and not HM1.

Hi all,

Enet now does text HHs. There is no reason for you not to add the support to HM1. Here is a sample HH

Game #4391279: Hold'em (€0,10/€0,25) - 05:56:36 11.7.2012 - %6
Table 'Abuja 1 - No Limit' 6-max Seat #0 is the button
Seat 1: ooobalotelli (€4,15 in chips)
Seat 2: angelo (€25,17 in chips)
Seat 3: InRodWeTrust (€27,28 in chips)
Seat 4: forzaaaaa (€25 in chips)
Seat 5: materanight (€29,37 in chips)
Seat 6: tashakpulen (€25 in chips)
axel99: posts small blind €0,10
InRodWeTrust: posts big blind €0,25
*** HOLECARDS ***
forzaaaaa: folds
materanight: folds
tashakpulen: raises €0,75
ooobalotelli: folds
angelo: calls €0,65
InRodWeTrust: folds
Rake: €0,10
*** FLOP *** [KsKdQh]
angelo: checks
tashakpulen: bets €1
angelo: calls €1
Rake: €0,12
*** TURN *** [KsKdQhTc]
angelo: checks
tashakpulen: checks
*** RIVER *** [KsKdQhTc7c]
angelo: checks
tashakpulen: checks
tashakpulen: mucked
*** SHOWDOWN ***
angelo: shows [QcAd] (Two Pairs, Kings and Queens)
angelo: collected (€3,48) from pot
tashakpulen: mucks hand
*** SUMMARY ***
Total pot €1,75 | Rake €0,22
Board [KsKdQhTc7c]
Seat 1: ooobalotelli (dealer) folded
Seat 2: angelo (small blind) showed [QcAd] and won (€3,48) with Two Pairs, Kings and Queens
Seat 3: InRodWeTrust (big blind) folded
Seat 4: forzaaaaa folded
Seat 5: materanight folded
Seat 6: tashakpulen mucked

fozzy71
07-11-2012, 11:31 PM
Hi all,

Enet now does text HHs. There is no reason for you not to add the support to HM1. Here is a sample HH
...

HM1 will no longer be receiving new features and/or new site support. It will only be receiving critical fixes for existing features/sites.

Fortify
07-11-2012, 11:54 PM
HM1 will no longer be receiving new features and/or new site support. It will only be receiving critical fixes for existing features/sites.

Are you serious? I was promised by HEM staff that HEM1 would received enet support

fozzy71
07-12-2012, 06:11 PM
Are you serious? I was promised by HEM staff that HEM1 would received enet support

Yes, that comment came directly from upper management recently. When HM2 was released (after this thread was started) we stated publicly that HM1 would only receive critical updates for at least a year. I have sent your comments back to the management team and am waiting for an official reply from them but I didn't want you to think I was ignoring your recent comment.

Readingbluffs
07-15-2012, 11:49 AM
I'm in expecting. I wish be near the support for this site.

Fortify
07-16-2012, 12:59 PM
Yes for both HM1 and HM2.
(note: I haven't seen the programmers start on working on ENET, so I have my personal doubts they'll make the pre-set deadline)

Just a heads up. I'm sure we're all aware that Patvs has been a HM community spokesperson for a long time, and this is a direct promise from RVG that we will receive HM1 support. It'll be easy - the software now records text HHs instead of HH in the format that you are familiar with.

Patvs
07-16-2012, 07:01 PM
With regular handhistory files, there now is a good chance it will get HM1 support to import the handhistories.
But it won't necessarily get HM1 HUD support.

It will be added to HM2 first, after will be decided if it's easy to add the import parser to HM1 as well.

Readingbluffs
07-19-2012, 08:48 AM
Any notice? I hope when finish the problems with the new software this site get up a lot of traffic.

Patvs
07-19-2012, 10:46 PM
It's currently on the to-add list, AFTER the HM2 database update

Roflpain
07-24-2012, 01:11 PM
Woooooot !

fozzy71
07-24-2012, 02:39 PM
It's currently on the to-add list, AFTER the HM2 database update


Woooooot !

Sorry to rain on your parade, but there will actually be 2 more 'official' HM2 updates before we start adding new site/game support:

We are focused on our next release which includes a database update procedure which is delaying the release, and then our next release will be a major performance update release. Once these 2 releases have been officially released we will begin working on new site/game support and low priority requests like new stats.

msj219
07-26-2012, 03:27 PM
Could we get a rough estimate in timeline, like 6 months from now or a year from now just so people stop asking and there is some kind of time frame that this is expected to be done?

fozzy71
07-26-2012, 08:56 PM
We are never going to give you an actual time estimate in terms of days/months because as soon as we do that and miss the deadline people go crazy. It should be sooner rather than later and my estimate above may have been a bit pessimistic but I was trying to stress the fact that we have a lot of other higher priority bugs we need to fix before we likely add new site support.

With all of that being said: The developers just asked us for some recent hand history samples from various cash/tourney stakes because the hands attached to this ticket are from the old software client and we want to know if they changed the hand history formatting when they updated their client.

Please zip and email some recent hand histories, with a link to this thread and your forum name, to support@holdemmanager.com

Roflpain
07-29-2012, 09:01 AM
Hand History's are sent to support@holdemmanager.com
(this is only cash though)

Good luck with the update!

Sarek
07-30-2012, 04:23 AM
Thank you for the HHs, but we need all possible variations
cash - sng - mtt - holdem - omaha ...

djo
08-06-2012, 06:47 PM
almost only cash holdem runs on the network and i'm sure %95 of the users are interested in that..

Readingbluffs
08-08-2012, 11:19 AM
almost only cash holdem runs on the network and i'm sure %95 of the users are interested in that..

I agree, in this site el 99% offered is cash, sits no run and MTTs only u can find 2 of little buy in each day. Only we have a 1 big tournament in the month and we have months that no is in the lobby.
We like for cash, please please
Regards!

StonedShisha
08-25-2012, 08:53 AM
Thank you for the HHs, but we need all possible variations
cash - sng - mtt - holdem - omaha ...

so whats happening... progress?

fozzy71
08-25-2012, 12:15 PM
so whats happening... progress?

It is still high on the list for new site support but we are not adding any new site/game support until after we have released the upcoming major update with the new lighter datagrid and hybrid caching systems. I can't give an ETA for when the Hybrid/Datagrid update will be released so it is impossible to estimate when we will add any new site support.

new2hem
11-01-2012, 12:21 AM
It is still high on the list for new site support but we are not adding any new site/game support until after we have released the upcoming major update with the new lighter datagrid and hybrid caching systems. I can't give an ETA for when the Hybrid/Datagrid update will be released so it is impossible to estimate when we will add any new site support.

is it working now? when can we get hem2 to work on ENET?

udbrky
11-01-2012, 03:37 AM
This has not been finalized yet.

mordo
11-19-2012, 10:24 AM
But right now ENET history is in good .txt format and with syntax similar to other rooms that HM supports.
Here is the example:

Game #12593499: Hold'em (€1/€2) - 19:58:01 26.8.2012 - %6
Table 'Bulgaria 1 - No Limit' 6-max Seat #2 is the button
Seat 3: Pavlo1 (€200 in chips)
Seat 6: TreViiiii (€60 in chips)
Pavlo1: posts small blind €1
TreViiiii: posts big blind €2
*** HOLECARDS ***
Pavlo1: raises €3
TreViiiii: calls €2
Rake: €0,48
*** FLOP *** [4d3c7s]
TreViiiii: checks
Pavlo1: checks
*** TURN *** [4d3c7sAc]
TreViiiii: bets €4
Pavlo1: folds
Uncalled bet (€4) returned to TreViiiii
Pavlo1 collected (€4) from pot
Pavlo1: mucked
*** SUMMARY ***
Total pot €4 | Rake €0,48
Board [4d3c7sAc]
Seat 3: Pavlo1 (dealer)(small blind) folded
Seat 6: TreViiiii (big blind) collected (€7,52) from pot

It should be easy to add cash ENET support for HM with such common syntax. Or PT4 will do it faster and some people would buy PT instead of HM.

JimmyChances
11-19-2012, 02:54 PM
But right now ENET history is in good .txt format and with syntax similar to other rooms that HM supports.
Here is the example:

Game #12593499: Hold'em (€1/€2) - 19:58:01 26.8.2012 - %6
Table 'Bulgaria 1 - No Limit' 6-max Seat #2 is the button
Seat 3: Pavlo1 (€200 in chips)
Seat 6: TreViiiii (€60 in chips)
Pavlo1: posts small blind €1
TreViiiii: posts big blind €2
*** HOLECARDS ***
Pavlo1: raises €3
TreViiiii: calls €2
Rake: €0,48
*** FLOP *** [4d3c7s]
TreViiiii: checks
Pavlo1: checks
*** TURN *** [4d3c7sAc]
TreViiiii: bets €4
Pavlo1: folds
Uncalled bet (€4) returned to TreViiiii
Pavlo1 collected (€4) from pot
Pavlo1: mucked
*** SUMMARY ***
Total pot €4 | Rake €0,48
Board [4d3c7sAc]
Seat 3: Pavlo1 (dealer)(small blind) folded
Seat 6: TreViiiii (big blind) collected (€7,52) from pot



Wow! 7.5 pot and 0.5 euro rake. insane.

fozzy71
11-19-2012, 06:17 PM
But right now ENET history is in good .txt format and with syntax similar to other rooms that HM supports.
Here is the example:
......
It should be easy to add cash ENET support for HM with such common syntax. Or PT4 will do it faster and some people would buy PT instead of HM.

We will not start working on any new site support until sometime after our next HM2 release because HM1 and HM2 share the same parsing code. HM2 is our focus right now. Once we get our next HM2 release out the door we will start working on the HM1 issues. I can not give an ETA for our next release of HM1 since it relies on us first releasing HM2.

We did not want to start any new site support until AFTER our next HM2 release because of all the changes included in the new datagrid. If we also would have started on new site support along with the datagrid it would require even more internal testing and would likely introduce more new bugs that would delay the release of the datagrid changes. Once the new datagrid has been released the developers will start working on some new site support but we have a few new sites we are planning to support and I am unsure of which site will be added first or how long that might take.

mordo
11-20-2012, 04:44 PM
i was talking about ENET support for HM2 of course) HM2 should be main focus)

i understand your datagrid problem and kindly ask to add enet in the first case after releasing new datagrid;)

fozzy71
11-20-2012, 05:17 PM
i was talking about ENET support for HM2 of course) HM2 should be main focus)

i understand your datagrid problem and kindly ask to add enet in the first case after releasing new datagrid;)

This is an HM1 thread/forum so I have to assume that if you don't specify you are referring to HM1. When we start working on new site support the developers will use the network traffic for those sites, and number of customer email addresses on our internal request tickets, to determine which sites should receive priority. I don't have any control over which will get added first and can't give any sort of ETA at this time.

mordo
11-20-2012, 06:33 PM
oh didn't noticed topics name) actually i just googled this thread..

and number of customer email addresses on our internal request tickets
can u explain this part, should i send some email inquiry? i want to influence on developers choice)

Patvs
11-21-2012, 12:43 AM
I've added your email address to ticket HM-1371.
The more emails addresses are linked to the ticket.. (and every time a new address is added the ticket is automatically bumped to the top of the programmers list).

rkt1337
12-07-2012, 01:57 PM
I've added your email address to ticket HM-1371.
The more emails addresses are linked to the ticket.. (and every time a new address is added the ticket is automatically bumped to the top of the programmers list).

add me to the list. i want to know when enet is added

fozzy71
12-07-2012, 05:33 PM
add me to the list. i want to know when enet is added

I have added your email address to the ticket so we can notify you once we have fixed it in HM2.

If anyone else wants to be notified when it is fixed in HM2 please send an email to support@holdemmanager.com and include "Notify Me When HM-1371 Is Resolved" in the subject line and body of the email.

Since I have already posted in this thread (http://forums.holdemmanager.com/manager-general/126491-hud-enet-network-3.html#post1296732) that we will not be supporting any new sites in HM1 I am going to lock this thread to avoid any further confusion by me or anyone else.


HM1 will no longer be receiving new features and/or new site support. It will only be receiving critical fixes for existing features/sites.