Error Message
Page 1 of 2 12 LastLast
Results 1 to 10 of 15

Thread: Error Message

  1. #1
    Junior Member
    Join Date
    May 2012
    Posts
    21

    Default Error Message

    After updating to 3.0.15 i get an error message:

    System.FormatException: Die Zeichenfolge wurde nicht als gültiges DateTime erkannt.
    bei System.DateTime.Parse(String s)
    bei ywmCyQkdhnpOeIkReoo.vmpHtHktoOvvAHNW76W.XGQXN13NQ8 (Boolean , Boolean& , Boolean& , String& )
    bei SN4eHX9bwxskHkVLE61.HoF1VB9B91lRYboghsZ.fknv5f2oKH ()

    after that one there is another one saying:

    System.FormatException: Die Zeichenfolge wurde nicht als gültiges DateTime erkannt.
    bei System.DateTime.Parse(String s)
    bei ywmCyQkdhnpOeIkReoo.vmpHtHktoOvvAHNW76W.XGQXN13NQ8 (Boolean , Boolean& , Boolean& , String& )
    bei adHykREtl9LFcXag4C.QKjKGdODY2JpEcOlVW.iu23c37aSy()


    Leakbuster does start but gets stuck while running complete analysis.

    I dont know which version i was running before the update, but i never had any error messages.
    (Leakbuster No Limit)
    Current version is HM2 2.0.0.6866

    (I already tried http://forums.holdemmanager.com/leak...ease-read.html, no improvement)

    (I did delete lbguide.hem and history.leak as proposed here: http://forums.holdemmanager.com/leak...-datetime.html ,still no improvement)

    (Meanwhile i downgraded to v.3.0.08e1 with no error messages occuring, and LB doing a full analysis without problems)
    Last edited by TAB001; 06-15-2012 at 09:07 AM.

  2. #2
    Moderator Leak Buster Support's Avatar
    Join Date
    Aug 2009
    Posts
    2,273

    Default

    Ok, thanks. Developer is looking at it now.

  3. #3
    Moderator Leak Buster Support's Avatar
    Join Date
    Aug 2009
    Posts
    2,273

    Default

    Can you try deleting these two files:
    C:\Program Files (x86)\Holdem Manager 2\Config\lbguide.hem and C:\Program Files (x86)\Holdem Manager 2\history.leak

  4. #4
    Junior Member
    Join Date
    May 2012
    Posts
    21

    Default

    As i wrote above, i already tried.

    Results were that i did lose the history.
    I tried running a complete analysis and after deleting the files again a analysis by stake-levels.
    Both times LB hangs itself. (~72%)
    Last edited by TAB001; 06-15-2012 at 05:29 PM.

  5. #5
    Moderator Leak Buster Support's Avatar
    Join Date
    Aug 2009
    Posts
    2,273

    Default

    Try to re-download the NL file again and try (if you want). There was a slight change put in yesterday, but the developer is still working on the complete fix. Should have it up shortly. But the new one that's up there may fix your issue if you want to try it.


    1. Close HM2
    2. Download this file from the following link:
    http://acepokersolutions.com/files/LeakBusterHM2fix.zip
    3. Unzip and drop these files into the directory C:/Program Files x86/Holdem Manager 2/Modules/
    4. Replace the existing files.
    5. Restart HM2
    Last edited by Leak Buster Support; 06-16-2012 at 02:22 PM.

  6. #6
    Junior Member
    Join Date
    May 2012
    Posts
    21

    Default

    well ... that didnt work too well ...
    After unzipping and replacing the files HM crashes at start ...
    (I tried several times ... it allways crashes)

  7. #7
    Former HM Support DogNamedBluff's Avatar
    Join Date
    May 2011
    Posts
    5,598

    Default

    Please update to this version: http://www.holdemmanager.com/Downloa...AutoUpdate.exe (6997)

    If you continue to crash, please reproduce the problem and send your log.txt file to hm2support@holdemmanager.com with a link to this thread. -

    http://hm2faq.holdemmanager.com/ques...ger+Support%3F

    Thank you.

  8. #8
    Junior Member
    Join Date
    May 2012
    Posts
    21

    Default

    OK ... I updated to to version in the link.
    HM starts normal.

    Upon opening LB, i get 2 error messages

    First error message:

    System.FormatException: Die Zeichenfolge wurde nicht als gültiges DateTime erkannt.
    bei System.DateTime.Parse(String s)
    bei ywmCyQkdhnpOeIkReoo.vmpHtHktoOvvAHNW76W.XGQXN13NQ8 (Boolean , Boolean& , Boolean& , String& )
    bei SN4eHX9bwxskHkVLE61.HoF1VB9B91lRYboghsZ.fknv5f2oKH ()

    after that, another one:

    System.FormatException: Die Zeichenfolge wurde nicht als gültiges DateTime erkannt.
    bei System.DateTime.Parse(String s)
    bei ywmCyQkdhnpOeIkReoo.vmpHtHktoOvvAHNW76W.XGQXN13NQ8 (Boolean , Boolean& , Boolean& , String& )
    bei adHykREtl9LFcXag4C.QKjKGdODY2JpEcOlVW.iu23c37aSy()

    When running an analysis LB Hangs itself around 87%.
    (Tried several times.)


    UPDATE:

    OK , after deleting C:\Program Files (x86)\Holdem Manager 2\Config\lbguide.hem
    and C:\Program Files (x86)\Holdem Manager 2\history.leak

    both HM and LB start normal and seem to be running without problems.

    Thank you
    Last edited by TAB001; 06-17-2012 at 12:04 PM.

  9. #9
    Moderator Leak Buster Support's Avatar
    Join Date
    Aug 2009
    Posts
    2,273

    Default

    It eventually go there. Glad it's resolved for you.

  10. #10
    Junior Member
    Join Date
    May 2012
    Posts
    21

    Default

    ...seems like i rejoiced far too soon.

    After finishing playing, i started LB and suddenly get this error message:

    System.NullReferenceException: Der Objektverweis wurde nicht auf eine Objektinstanz festgelegt.
    bei adHykREtl9LFcXag4C.QKjKGdODY2JpEcOlVW.cAM3dDMQU1(B oolean , Boolean , Boolean , Boolean , Boolean , DateTime , DateTime , String , Int32 , C11ZDfJ0yqdNmaHbuU , List`1 savedStatsArray, vmpHtHktoOvvAHNW76W , Boolean )

    And LB freezes at 90% of the analysis.
    Last edited by TAB001; 06-18-2012 at 10:26 AM.

Similar Threads

  1. Error message
    By PLANKTON in forum Manager General
    Replies: 1
    Last Post: 06-22-2011, 04:33 PM
  2. Replies: 1
    Last Post: 12-17-2010, 03:59 PM
  3. error message
    By tessbees in forum Manager General
    Replies: 1
    Last Post: 11-26-2009, 03:55 AM
  4. Replies: 4
    Last Post: 10-06-2009, 11:18 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •